Building the test panocamera
Here we are…

the assembly works, perfectly fits the fisheye adapter over the camera lens.
The articulated fitting over the piece-and-love inox base is a little bit loose. Too complicated to work as it is.
The inox base is part of a foolish project I was taking around with Agnos in PanoTools meeting in switzerland… and that is still alive.
For a final, solid head, the project is still going on.

Here we are today step.
Building a permanent 37mm mount for the A460 cameras!!!
We had 3 rings made… just to fit the 40.5 to 37mm filter adapter right on the camera lens barrel. It fits perfectly, going so tight you can consider it permanent.

To modify the ring we used 2 component glue.
The inox ring will not separate any more from the filter adapter…

Then all will go tight fit on the lens barrel when the glue is dired…

Things still to do:

• solder a 3 way usb female A to a 3.5 jack long cord…
• find a good way to hold the 3 cameras together… a new triple panohead.
• make the TEST!!!

Thanx to Sergio, Chiara’s Uncle, for the inox rings!