Oneshot Panocamera · second step
Here we are today step.
Building a permanent 37mm mount for the A460 cameras!!!
We had 3 rings made… just to fit the 40.5 to 37mm filter adapter right on the camera lens barrel. It fits perfectly, going so tight you can consider it permanent.
To modify the ring we used 2 component glue.
The inox ring will not separate any more from the filter adapter…
Then all will go tight fit on the lens barrel when the glue is dired…
Things still to do:
- solder a 3 way usb female A to a 3.5 jack long cord…
- find a good way to hold the 3 cameras together… a new triple panohead.
- make the TEST!!!
Thanx to Sergio, Chiara’s Uncle, for the inox rings!
ok, bit by bit we are arriving close to solution of all the small things…
I’m still working around for a temporary, solid, creative solution to hold the cameras together.